|
|
|
|
United
Pet Pig Registry Pot
Bellied Pig Health and Information Articles FAQS
Center Pig
Picture Gallery Other
Critters Picture Page PigPals
Store
|
Potbellied Pig Health Care Articles and Information | |
|
Weight: How To Weigh Your Pet Pig Without a Scale If you cannot get your pot belly pig on a scale, you can still weigh her by using the formula below. You will need a measuring tape similar to those used by tailors. The formula is not exact, but it comes within about three percent of the actual weight. The formula is as follows: 1. Girth Measurement Take the heart-girth measurement. Your measuring tape needs to go around the body just behind the front legs and over the shoulder area. As an example for you I will use the measurements of Flower. Her girth measurement is 43 inches. 2. Square the result (Multiply the measurement by itself). Example: The measurement was 43 inches. 43 X 43 = 1,849. 3. Length Measurement: Measure the length of your pig. Start at the top of his or her head right in between the ears and measure down to the start, or base, of the tail (not the end of the tail). Flower's length is 39 inches. 4. Girth Result X Length: Take the girth measurement result (in the example above this was 1,849) and multiply that times the length of your pig. In our example this would be: 1,849 X 39 = 72,111. 5.
Weight Calculation: Divide this result by 400, and you'll have
a weight accurate to within about three percent. In our example: 72,111
divided by 400 = 180 pounds. Factoring in the 3% variance (5.4 Credit for this formula goes to the Old Farmer's Almanac 1993 |
|
MAIN PAGE | PICTURE PAGES | OTHER CRITTERS | FAQS CENTER | OUR STORE | LINKS | CONTACT COPYRIGHT
2000 - 2008 |
